Before we begin, here are the points that need to be there in order to start the allows you to use the WPS push button method.
The next step is to have a physical WPS push button to be had. Please take a look at your tool's user guide for info.
If the WPS push button isn't to be had please use the commands inside the standard connection method section.
The next is to ensure that your network should be the usage of the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled get entry to factors to use this protocol.

The next step is to make sure that the printer becomes on for the process of canon pixma mg2520 wireless setup .
Now you need to press and hold the Wi-Fi button on the top of the printer until the orange alarm lamp flashes as soon as and then release it.
The next one is to make sure that the Wi-Fi button begins to flash blue and then go to your get entry to factor and press the [WPS] button within 2 mins.
For specific info concerning urgent the WPS button, please talk to the get right of entry to factor guide.